PETRONAS PARAFLU UP 1LTR RED ANTIFREEZE

PARAFLU UP 1LTR RED ANTIFREEZE

A concentrated protective fluid for radiators. It is a Mono-ethylene Glycol base fluid, formulated with organic inhibitors based on O.A.T. (Organic Acid Technology). Also suitable for professional use. Paraflu Up is a specific protective fluid for the cooling systems that contain innovative light alloy materials.

Characteristics

Advanced stringent laboratory tests by PLI show that Paraflu Up meets all requirements even in extreme running conditions. Paraflu Up mixed with 50% water allows:

• The maintenance of the protecting characteristics of the inhibitor agents


• Optimal heat removal from the engine combustion chamber


• The maximum protection against: - Cavitation and electrical discharge; - Freezing (down to external temperatures of -40°C); - Limescale formation; - Boiling in the warm periods, traffic, city journeys (circuit temperature up to +125°C); - Excessive swelling of rubbers and plastic in the circuit; - Formation of deposits in the circuit also in conditions of exasperated exercise

Advice On Use

For proper use of the product, Manufacturers recommendations must be followed. When refilling, in order to restore the level of the fluid, the product must be mixed with 50% water.

Do not use the product concentrated.

Do not mix products of different brand or origin.

ALFA ROMEO 156 POWERFLEX PFF1-812BLK BLACK SERIES FRONT LOWER WISHBONE REAR BUSH [SET OF 2]

Diagram Ref: 2

We have found that there can be a difference in the end-pin diameter on some wishbones, especially non-genuine replacements. We supply PFF1-812 with the more popular 20mm bore sleeve, but we have seen wishbones with 21.3mm end pins. If you find the ones supplied are incorrect for your vehicle, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. PFF1-812 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket.

Diagram Ref: 2ACK SERIES FRONT LOW

We have found that there can be a difference in the end-pin diameter on some wishbones, especially non-genuine replacements. We supply PFF1-812 with the more popular 20mm bore sleeve, but we have seen wishbones with 21.3mm end pins. If you find the ones supplied are incorrect for your vehicle, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. PFF1-812 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket.